For the scented candles 

• Remove the packaging before lighting the candle.
• During the first burning, remove the large gemstones and flowers/herbs at the top of the candle.
• Always place the candle on a stable, heat-resistant surface.  Make sure that the candle is always standing straight, so that it cannot fall over.
• Ideally, you should burn a candle for about 4 hours, especially the first time.  This way, the candle is given enough time to release its fragrance and form a nice melt pool.
• However, never leave the candle burning for more than 4 hours, as the glass could become too hot, causing it to crack or shatter.  Let the wax solidify for at least one hour before lighting the candle again.
• The glass gets warm when the candle burns.  Caution when touching.
• Never leave a burning candle unattended.  Extinguish the candle when you leave the room.
• Always keep the candle out of reach of children and pets.
• Leave at least 10 cm between burning candles and never place them near flammable items, such as curtains.
• Never place the candle in a room where there is a draught.
• Never place the candle near a heat source.
• Do not move a burning candle.
• Make sure the flame cannot touch the glass and extinguish the candle if there is at least 0.5 cm of wax left in the glass.  If you continue to let the candle burn from this point on, you risk the glass breaking because of the heat.
• Extinguish the candle if it smokes, if the flame is too high or if the flame comes too close to the glass.
• Use a candle extinguisher to extinguish the candle instead of blowing it out.
• Wanneer de kaars gedoofd is, ventileer de kamer waar de kaars staat dan goed.
• Unlike paraffin, you can simply remove this wax with warm water and soap.  When your candle has burned out, you can clean your jar and reuse it if you wish.  Even if you have stained yourself with this wax, you can simply remove the stain with warm water and soap.
• Cut the wick to 0.5 cm before each use.  Use a wick cutter or possibly a nail clipper for this.  This ensures that the flame is not too large and that the candle burns quietly. 
• In case of skin or eye irritation, rinse carefully with water and seek medical advice.

 

For Wax Melts

• Place the wax melt burner on a stable, heat-resistant surface.
• Use the wax melts only in a wax melt burner (minimum height 10cm).
• Make sure there is always a wax melt in the holder when you light the wax melt burner.
• Place a wax melt (or a few) in the dish and light a tealight at the bottom.  Make sure that you never put too many wax melts in the dish at once, which could lead to the dish overflowing during melting. 
• Use only good-quality tea lights and cut the wick of the tea light a little shorter (to about 0.5 cm), so that the wax melt can melt quietly and spread its fragrance.
• Never leave a waxmelt burner unattended and always keep it away from children and pets.
• Keep the wax melt burner away from curtains and other flammable objects.  
• Always ensure a draught-free environment when using the wax melt burner.
• Never leave the burner burning for more than 4 hours.
• Please note that the burner may become hot after a while.  Always allow it to cool completely before moving it.
• If the wax melt no longer gives off a scent, blow out the tea light and allow the wax to cool.
• Wait until the wax has completely set and remove the set wax with a teaspoon.  Afterwards, clean the holder with warm water and some detergent.

 

For electric wax melt burners

• Plug Type: European plug
• Lamp Information: 25w G9 Halogen Lamp (1 included)
• For use with: Only with Wax Melts
• Touch powered: Touch the base of the lamp to switch it on and to select different heating intensities. Touch once for low heat, twice for medium heat, three times for the highest heat setting and four times to switch off again.
• Product instructions: No assembly required. The wax melt lamp is delivered fully assembled including a bulb. Always use this product on a heat-resistant surface and not near draughts or flammable materials such as curtains, etc. Only for use with wax melts, not for use with fragrance oils or essential oils. Do not overfill. The glass bowl sits on a metal frame inside the lamp and is removable for easy cleaning and for accessing the lamp, but first unplug the power cord. Always read the safety instructions provided with the product. Do not leave the wax lamp burning unattended and remove the plug from the socket when not in use. Allow to cool before picking up the product. The wax melt lamp comes with a European plug.

PLEASE MAKE SURE YOU THOROUGHLY READ ALL INSTRUCTIONS FOR THIS ELECTRIC WAX WARMER BEFORE USING IT.  FAILURE TO FOLLOW THESE INSTRUCTIONS MAY RESULT IN INJURY OR FIRE.

Warning: When using electrical appliances, basic safety precautions should always be followed.  Keep out of the reach of children and pets to prevent fire and injury..  This product is not recommended for children of all ages.  This product should only be used with wax melts, it is NOT recommended for fragrance oils or essential oils.  Always follow the instructions given in the safety instructions for fragrance burners and electric wax lamps on this website. Make sure that you   do not put too many wax melts in the holder, otherwise there is a possibility that the dish will overflow during the melting of the wax melts. The wax warmer should always be placed on a flat, horizontal, heat-resistant surface during use.  Never leave unattended during use and keep away from curtains and fabrics. 

WARNING This is an electrical appliance and there is therefore a risk of electric shock if a metal or foreign object is inserted into any part of the heater or if it is used incorrectly.  Never immerse the device in water or other liquids.  Make sure that the heater is disconnected from the mains and has cooled down before touching it.

Safety information: Check before use that the power cable is firmly attached to both the appliance and the plug.  lways ensure that the power cable and plug are in good condition and do not show any signs of wear or damage.  DO NOT use the device if there is any sign of damage.  Always ensure that the cable does not present a tripping hazard during use.  Always unplug the heater when not in use.  In the event that the power cable or plug needs to be replaced, this must always be done by a qualified person in order to avoid hazards.

Bulb Information: This warmer uses G9 25W halogen bulbs, always replace them with the same wattage G9 bulb.  When replacing the lamp, always make sure that the device is switched off and the plug is removed from the wall socket.  Allow the lamp to cool down completely before touching it.  Remove the lamp from the socket by grasping the lamp lightly but firmly and pulling it upwards until it comes loose from the socket.  Place the replacement lamp back into its socket.  CAUTIONDo not insert fingers into the exposed socket.  Once the lamp is in place, the power can be switched on and the heating can be turned on.  Dispose of the old lamp safely and out of reach of children.

Use with wax melts: The wax melt should be placed in the centre of the heated glass holder.  Always make sure the holder is empty, clean and dry before using a new wax melt.  As soon as the wax melt no longer gives off any fragrance, the heater should be switched off.  After cooling, you can clean the glass holder for the next use.  Always make sure there is a wax melt in the glass holder before lighting the lamp.

Warning: Heated wax can cause burns.  Never touch heated wax.  Do not insert fingers or hands.  Do not add water or oil to the glass dish. Never leave the heater unattended during usage.  Allow the wax to cool and harden before cleaning the glass holder.  The heated wax and the glass dish may remain hot for some time, even after the heater has been switched off and the plug has been removed from the wall socket. 

Cleaning NEVER move the heater when it is switched on or in use.  NEVER immerse the device in water or other liquids.  Turn off the heater and unplug it from the wall socket to clean it.  Allow the device to cool down completely and let the remaining wax harden.  Remove the wax from the holder, using a teaspoon if necessary.  Do not use abrasives or equipment that could scratch or damage the holder.  Use a warm damp sponge or cloth with soap to clean the inside and outside of the holder.  Wipe dry with a soft cloth.

Operating information: This heater is touch operated.  Tap the metal base to select heat options.

1 tap: On / Low heat

2 taps: Medium heat

3 ticks: High Heat